|
***Remanufactured Aftermarket Parts, Lower Prices In Larger Quantities Of
100 Or More!
****Small Order Charge Of $4.50 For Orders
Under $10.00 |
|
|
|
Ferrule Glides with
Internal Holding Clip |
 1-1/4
inch diameter base and will swivel up to a 34 degree angle, allowing the
base to remain flat on the floor. Internal Clip Holds Tubing. Case
Hardened steel base for long life in high use conditions.
Internal Clip Holds Tubing |
|
|
Part# |
Size Of Tube |
Base Material |
Price Each |
Qty |
|
Outside |
Inside |
|
F-3627 |
5/8" |
1/2" |
Steel |
$1.78 |
|
|
F-3680 |
11/16" |
1/2" |
Steel |
3.18 |
|
|
F-3757 |
3/4" |
9/16" |
Steel |
2.74 |
|
|
F-1873 |
7/8" |
3/4" |
Steel |
2.90 |
|
|
F-1103 |
1" |
7/8" |
Steel |
2.54 |
|
|
F-8000 |
1-1/8" |
1" |
Steel |
2.79 |
|
|
F-3627-N |
5/8" |
1/2" |
Nylon |
2.72 |
|
|
F-3757-N |
3/4" |
9/16" |
Nylon |
2.74 |
|
|
F-1873-N |
7/8" |
3/4" |
Nylon |
2.90 |
|
|
F-1103-N |
1" |
7/8" |
Nylon |
2.62 |
|
|
F-8000-N |
1-1/8" |
1" |
Nylon |
2.79 |
|
|
F-8000-ADJ |
1-1/2" |
1" |
Nylon |
3.10 |
|
|
|
|
| |
|
Ferrule Glides with Outside
Holding Clip |
|
The F-1626 and F-1626-N Glides have a 1-1/8" diameter base and grab onto
the outside of the popular 5/8" (outside) diameter tube. It is original
equipment used by many chair manufacturer
We
also offer the Heywood Wakefield glide that fits the 9/16" (outside)
tubing on their chairs.
Heywood
Wakefield
F-1623 |
|
|
Part# |
Size Of Tube |
Base Material |
Price Each |
Qty |
|
Outside |
Inside |
|
F-1623 |
9/16" |
7/8" |
Steel |
$1.99 |
|
|
F-1626 |
5/8" |
1/2" |
Steel |
1.80 |
|
|
F-1626-N |
5/8" |
1/2" |
Nylon |
2.54 |
|
|
|
|
| |
|
Glide Caps
These will fit over the base of metal glides to protect delicate floors from scratching and act a a "retread" that will extend the life of the glide. Measure the glides base outside diameter for fit. |
|
Non-Marking White Plastic Caps
 |
shown installed |
|
Part# |
Glide Base Diameter |
Price Each |
Qty |
|
GC-116 |
1-1/16" |
$.90 |
|
|
GC-136 |
1-3/16" |
.93 |
|
|
GC-114 |
1-1/4" |
1.18 |
|
|
GC-138 |
1-3/8" |
1.68 |
|
|
GC-112 |
1-1/2" |
1.67 |
|
|
|
|
|
|
|
|
Felt Base Glide Caps -
Special Type |
|
|
|
Felt
Base Glide Cap Have a snap-on base with molded-in carpet fibers. They
extend the life of the chair glide and make classrooms quieter.
Available in two sizes, both fit onto a 1-14" base glide with a glide
foot corner height of 1/4" or 5/16"
|
|
|
Glide Puller For Easy
Removal |
|
|
This tool is used to grab the
glide base and literally tear the glide off of the chair leg.
The steel clip is simply left up inside the tube.
Part # GP-10
$38.50 each
|
 |
|
|
|
|
|
|
|
Platform Glides |
 Square
An internal rubber cushion
separates the chair leg from the Case hardened steel glide base. This
provides a silencing action for a quiet movement of the furniture.
 Round
|
|
|
Plastic Cap Glides |
Popular on stack chairs, the clear plastic
cap acts as a cushion that keeps the finish of chair legs from
scratching during stacking. Case Hardened steel base for long life.
7/8 inch base diameter.
|
|
|
Nail-On Glides |
|
The nail is
molded into the base for strength and silencing action. There is a rubber
cushion that rests between the glide base and your furniture. Metal base
is case hardened steel for long life under heavy use.
Also Available in White Plastic Base |
|
 |
 |
|
Nail On Glide- Metal Base
N-20XX
|
Nail On Glide- Plastic Base
PN-20XX |
|
|
For Long life under heavy use |
|
Part# |
Base Diameter |
Base Material |
Price Each |
Qty |
|
N-2087 |
7/8" |
Steel |
$.87 |
|
|
PN-2087 |
7/8" |
Plastic |
.87 |
|
|
N-2101 |
1-1/8" |
Steel |
.99 |
|
|
PN-2102 |
1-1/8" |
Plastic |
.90 |
|
|
|
|
|
Adjustable Glides |
 Plastic
Base
Plastic base with metal cover shell. Diameter is 1-1/8". Nickel plate cover shell gives "chrome" quality
appearance. White color bottom.
 Rubber
Rubber Cushion Glides have the machine screw molded into the base to offer a "silencing" effect when furniture is moved across the floor. 1-1/16" base diameter. Base is case hardened,
nickel plated steel for long life under heavy use. |
| Plastic |
|
|
|
|
| |
Thread |
|
|
|
| Part # |
Size/Length |
Price ea |
Qty |
| A-2505 |
1/4-20x 1/2" |
1.40 |
|
| A-2505-BR |
1/4-20x 1/2" |
2.48 |
|
| A-2505-NS |
1/4-20x 1/2" |
3.28 |
|
| A-2510 |
1/4-20x 1" |
1.16 |
|
| A-2510-NS |
1/4-20x 1" |
2.80 |
|
| A-2515 |
1/4-20x 1-1/2" |
1.60 |
|
| A-5010 |
5/16-18x 1" |
1.28 |
|
| A-5012 |
5/16-20x 1-1/2" |
1.76 |
|
| *BR=Brass
*NS=Non-skid |
| Rubber |
|
|
|
|
A-5640 |
1/4-20x 1/2" |
.96 |
|
| A-5640-SS |
1/4-20x 1/2" |
11.84 |
|
| A-5641 |
1/4-20x 1" |
.96 |
|
| A-5651 |
5/16-18x 1" |
3.08 |
|
| A-5683 |
8-32x 1/2" |
2.92 |
|
|
*SS=Stainless Steel Base |
|
|
|
 Jumbo
jumbo Adjustable Glides hold the heavy loads! Nickel plated metal cover shell gives a high quality "chrome" appearance. White plastic base is gentle on any floor. Hex nut at the base of the thread allows you to adjust the
height with a wrench.
Thread shown without hex nut |
|
 Small
Plastic Adjustable Glide
Small Plastic Adjustable Glide have
threaded studs molded into the plastic base. |
|
|
Plastic Base Adjustable Glides
|
1-1/8 inch Plastic Base Diameter
A-31XX
|
|
Part# |
Thread
Size / Length |
Color |
Price Each |
Qty |
|
A-3140W |
1/4-20 x 1/2" |
White |
$1.86 |
|
|
A-3140B |
1/4-20 x 1/2" |
Black |
1.86 |
|
|
A-3141W |
1/4-20 x 1" |
White |
1.71 |
|
|
A-3141B |
1/4-20 x 1" |
Black |
1.71 |
|
|
A-3151W |
5/16-18 x 1" |
White |
1.77 |
|
|
A-3151B |
5/16-18 x 1" |
Black |
1.77 |
|
|
|
|
|
|
 Small 5/8" base diameter and knurled edges make this glide a popular choice for small equipment.
Close-up view of Rounded Bottom
|
|
Part# |
Thread
Size / Length |
Color |
Price Each |
Qty |
|
A-1140R-BL |
1/4-20 x 1/2" |
Black |
$1.26 |
|
|
A-1141R-BL |
1/4-20 x 1" |
Black |
1.26 |
|
|
|
|
|
|
 Adjustable
Swivel Glide
1/4-20 x 1" Thread and an all metal base .Internal
rubber cushion acts as a "silencer: when furniture is moved. Case hardened
steel base cap for long life. 1-1/4" base diameter |
 Propeller
Nuts
Good where you need a thread, but do not want the teeth of a T-Nut biting into the wood. Ribs hold onto the inside of the hole allowing for easy installation.
|
Part# |
Thread Size |
Thread Height |
Price Each |
Qty |
|
HPN-5 |
5/16"-18 |
3/8" |
$.89 |
|
|
HPN-4 |
1/4"- 20 |
1/2" |
.96 |
|
|
|
Part # AS-2510
$3.16 ea
|
|
|
|
Weld Cups
and Inserts |
|
The classic way to finish the bottom of patio
furniture. The steel cup is welded onto the end of metal rod or tubing.
The insert is then placed into the weld cup to act as the glide surface.
The weld cup finish is raw steel. Choose from two standard diameters. The
standard center hole is 3/8 inch diameter. Other sizes are available,
please inquire. |
Metal Weld Cup and Plastic Glide Being
Installed |
Metal Weld Cup
|
Plastic Glide
|
|
|
|
