Herman Miller Action Office


	Back to Home	*For Total Solutions*
**Need Help! E-mail Problem Solver**

Herman Miller Action Office Parts
Call for Current Pricing
to view dims click on any image


Fabric-Covered Panel	Tackable Acoustical- Barrier Panel
This structural panel has fabric surfaces, a painted top cap, and adjustable glides. It is UL listed and has a Class A-fire retardant rating except when upholstered with Customers Own Material. part # A0110	This structural sound-barrier panel has fabric surfaces, a painted top cap and adjustable glides. The entire panel surface has a Noise-Reduction Coefficient (NRC) Rating of 35. The tackable panel surface above the standard work surface height (approximately 29" form the floor) has an NRC rating of 60 Part # A0125
Partial-Glazed Panel	Glazed Panel
This non powered, structural panel has an 18" high translucent acrylic insert with a painted frame, a fabric covered lower section, a painted top cap, and adjustable glides. Part # A0165	This structural panel has a painted frame and top cap, a translucent acrylic insert, and adjustable glides .It can be used as a return panel. Part #A0160
Open Panel Frame	Door Panel
This structural panel frame has an opening for communicating and sharing equipment. It has a painted frame and top cap and adjustable glides. The panel cannot be used as a return panel. It is UL listed and has a class A fire retardant rating. Part #A0150	This 80" high wide panel has a painted frame and top cap, a glazed side panel. a laminate or veneer door, and adjustable glides. The door can be installed to swing left or right and to open in or out. The door cannot be keyed alike. Electrical wires and voice/data cables cannot be muted through this panel Part #A0190
Carpet Gripper	Wall Fastener
These molded plastic grippers fit onto the adjustable glides of frames and panels manufactured after 1998, and provide added stability on carpet. They cannot be used on hard floors. Finish is black Part# G1190	This black panhead fastener attaches to a wall strip to a wall. Part #A0291
Wall Start	Draw Rod
This assembly connects a panel to an architectural wall, column, or panel of equal height at a90° angle. Part#A0210	This draw rod connects Action Office Series 1 or 2 panels or Co/Struc C-series panels of equal heights in a straight line. Part # A0215
Draw, Rod Change of height	2-way 90° Connector
This draw rod connects Action Office Series 1 or 2 panels or Co/Struc C-series panels of equal heights in a straight line. Part # A0219	This connector joins 2 panels of equal or unequal heights at a 90° angle. It has a enameled or fabric surface. Part #A0220
2-Way 120° Connector	Spacer
This connector joins 2 panels of equal or unequal heights at a 120° angle. It has a enameled or fabric surface. Part #A0221	This spacer joins 2 panels of equal or unequal heights in a straight line and compensates for dimensional gain in a panel run. It has an enameled or fabric surfaces. Part # A0260
3-Way 90° Connector	3-Way 120° Connector
This connector joins 3 panels of equal or unequal heights at a 90° angles. It has a enameled or fabric surface. Part #A0230	This connector joins 3 panels of equal or unequal heights at a 120° angles. It has a enameled or fabric surface. Part #A0231
Panel Hinge	Finished End
This black umber panel hinge connects 2 panels of equal or unequal heights at any angle up to 180°. It has an enameled surface. Part #A0270	This cover finishes the exposed end of a panel or supports a transaction surface at the end of a panel run. It has an enameled surface. Part # A0250
Finished End, Change of Height, Panel/Panel	Finished End, Change of Height, Panel/Connector
This cover finishes the exposed end of a panel that joins panels of unequal heights. It is 32" long but can be filed cut to the appropriate length. Part # A0251	This cover finishes the exposed end of a connector that joins panels of unequal heights. It 46" long but can be field cut to the appropriate length. Part#A0259
Base Power Entry, Direct Connect 3 Circuit	Base Power Entry, Junction Box 3 Circuit
This power entry connects a buildings electrical supply from a wall, floor, or column to the base of a powered panel. It is distributes up to 3 20-amp circuits and includes a 6' cable, which can be field cut to the appropriate length. The power entry plugs directly into the bases electrical harness and uses the same connection point as receptacles. Part #A0322	This power entry connects a buildings electrical supply from a wall floor or column to the base of a non powered panel and distributes up to 3 20-amo circuits. It includes an electrical harness, 2 standard side covers with receptacle locations, 2 fillers, a 3-piece end cap trim cover, and a cable connector. Part#A0323