Herman Miller Action Office


	Back to Home	*For Total Solutions*
**Need Help! E-mail Problem Solver**

Herman Miller Action Office Parts III
Call for Current Pricing
to view dims click on any image


Voice/Data Cable Channel End Cap	Fabric Covered Panel
This end cap finishes the exposed end of a voice/data cable channel Part # NP238	This structural panel has fabric surfaces, a painted top cap, cable management side covers, and adjustable glides. It is UL listed and ahs a Class A fire retardant rating, except when upholstered with Customers Own Material Part # A1120
Tack able Acoustical Barrier Panel	Acoustical Barrier Panel
This structural sound barrier panel has fabric surfaces, painted top cap, cable management side covers, and adjustable glides. The entire panel surface has a Noise Reduction Coefficient (NRC) rating of 35. The tackable panel surface above the standard worksurface height (approx. 29" from the floor) has an NRC Rating of 60. The entire panel has a sound transmission class (STC) rating of 28 and is UL Listed. Part # A1125	This sound reducing structural panel has fabric surfaces, a painted top cap, cable management side covers, and adjustable glides. It has a Noise Reduction Coefficient (NRC) rating of 65, and a Sound Transmission Class (STC) rating of 27. Part # A1131
Partial-Glazed Panel	Glazed Panel
This non-powered, structural panel has an 18"-high translucent acrylic insert with a painted frame, a fabric-covered lower section , a painted top cap, cable management side covers, and adjustable glides. Part #A1165	This non-powered, structural panel has a painted frame and top cap, a translucent acrylic insert, cable management side covers, and adjustable glides .It can not be used as return panel. Part #A1160
Open Panel Frame	Door Panel
This structural panel has a opening for communicating and sharing equipment. It has a painted frame and top cap, cable management side covers, and adjustable glides .It can not be used as return panel.. Part # A1150	This kit is 85" high -43" wide panel has a painted frame and top cap, a glazed side panel, a laminate or veneer door, 2 cable management side covers, and adjustable glides. The door can be installed to swing left or right and to open in or out. The door cannot be keyed alike. Electrical wires and voice/data cables cannot be routed through this panel. shipped knocked down. Part # A1190
Cable Management Panel Frame	Cable Management Panel Face
This 6" wide structural frame holds cable management panel faces on each side and has a top cap cable management side covers. Part # A1180	This panel face attaches to side 1 or side 2 of a cable management panel frame and has a vinyl or fabric surface. The 39" high powered panel face has 1 receptacle location per side: 47" to 85" high powered panel faces have a 2 receptacle locations per side. Receptacles locations are at work surface height. The powered panel face is manufactures in 2 pieces with a joint just below the work surface height: the non powered panel face has no-joint. Part # A1181 Part # A1182
Seismic Floor Anchor	Stacking Fabric Covered Panel
This Bracket fastens Action Office Series 1 and @ ,Prospects, Q and Co/Struc panels or Ethospace frames to hard floors or carpeted floors. Finish is Black *Part #X1190***	This14" high panel attaches to the top of an action Office Series 1 or 2 panel and to an adjacent panel or stacking panel and/or connector of equal or greater height. It has fabric surfaces. The panel can stack on another stacking fabric covered panel. It cannot span 2 panels. Part # A1126
Stacking Glass Panel	ELT Acoustical Panel
This panel attaches to the top of an Action Office Series 1 or 2 panel and to an adjacent panel or stacking panel and/or connector of equal or greater height. It has a painted frame with a glass insert. The stacking glass panel can stack on 1 stacking fabric covered panel. It cannot span 2 panelsPart #A1166	This sound reducing structural panel has fabric surfaces, a painted top cap, cable management side covers, and adjustable glides. It has a noise reductions Coefficient (NRC) rating of 80 and a sound Transmission Class (STC) rating of 20. Part # A1130
Fabric Covered Panel with Wood Top Cap	Wall Strip
This structural panel has fabric surfaces, a veneer top cap, cable management side covers, and adjustable glides. The veneer top cap adds 1" to the panel height. Part #NP253	This wall strip attaches with wall fasteners to a structural wall to support hanging components. 2 wall strips are required to hang a component. Part #A0213
Wall Fastener	Wall Start
This black panhead fastener attaches to a wall strip to a wall. Part # A0291	This assembly connects a panel to an architectural wall, column, or panel of equal height at a90° angle. Part #A0210
Draw Rod	Draw Rod Change of Height
This draw rod connects Action Office Series 1 or 2 panels or Co/Struc C-series panels of equal heights in a straight line Part #A0215	This draw rod connects Action Office Series 1 or 2 panels or Co/Struc C-series panels of equal heights in a straight line. Part #A1220