Herman Miller Action Office

Herman Miller Action Office ® Parts VII
Call for Current Pricing
to view dims click on any image

Squared-Edge Round -End Peninsula	Squared-Edge Rectangular Peninsula
This peninsula hangs from a panel, wall strips, or another work surface and is supported by 27-1/2" high legs with adjustable glides. It has predrilled holes for a pencil drawer and includes attachment hardware. Par # A2350	This peninsula hangs from a panel, wall strips, or another worksurface and is supported by a 27-1/2" high legs with adjustable glides. It has predrilled holes for a pencil drawer and includes attachment hardware. Par # A2352
Squared-Edge D-Shaped Work Surface	Squared-Edge Corner Wedge
This squared-edge worksurface fits against 2 24"-wide work surfaces that are at the end of a run and includes a cutout to allow a flush fit against the finished end. It has 27-1/2" high legs and a laminate top and vinyl edge. Part # A2355	This wedge attaches to 2 work surfaces at a 90° angle to provide a corner worksurface. It can be used with Action Office , Prospects, Q and Ethospace systems. The wedge has a laminate top and a vinyl edge or a veneer top and edge. Parv # G2091
Pass-Through Cover	Radiused-Edge Rectangular Work surface
This cover provides a continuous surface for a 2 back-to back squared-edge work surface hung on an open panel frame. It is 48" wide but can be field cut to fit a narrower opening. Par t# A2399	This work surface hangs from a panel or wall strips and has a predrilles hols for drawer and suspended pedestals. It has a laminate or veneer top and vinyl edge. Part # A0417
Radiused-Edge Corner Work surface	Radiused-Edge Corner Work surface w/input platform Cutout
This 90° corner worksurface hangs from Action Office Series 1 or Series 2 Panels or from wall strips. It has a cable access hole and a laminate or veneer top and vinyl edge. Part#A0421	This 24" deep worksurface hangs from panels or wall strips and is used with adjacent 24" deep radiused work surfaces. It has a laminate top and vinyl edge., 2 cable access holes, and a cutout for a user-adjustable input platform. Part #A0427
Flex-Edge Input Platform	Radiused-Edge Round End Peninsula
This adjustable platform attaches to a corner worksurface with an input platform cutout. The platform has a laminate top. A flexible waterfall front edge supports the user's arms during input and writing tasks, and flexible edges at each side provide protection from pinching between the platform and the adjacent work surface when adjusting the height. A curbed edge keeps items from rolling off the back and side edged. The height is adjusted with a paddle under the right side of the platform. The pneumatic assist mechanism allows the users to freely adjust the platform from 8" below the rear worksurface to 5-1/4" above it. The platform also tilts to 13" forward and 16" backward, using a knob on the right side. Part# G7730	This peninsula hangs from a panel, wall strips, or another worksurface and is supported by a 27-1/2" high legs with adjustable glides. It has predrilled holes for a pencil drawer and includes attachment hardware. Part # A0452
Radiused-Edge D-Shaped Worksurface	Work Surface Support, Single
This radiused-edge work surface fits against 2 24" wide worksurfaces that are at the end of a run and includes a cutout to allow a flush fit against the finished end. It has a 27-1/2" high legs and a laminate top and vinyl edge. Part # A0420	This bracket supports a work surface on the left or right side. It can be used in conjunction with an open return, work surface support panel, or support pedestal. Part #A2393
WorkSurface Braket	Work Surface Support Panel End
This black umber bracket attaches to the front corner of a hanging worksurface to provide additional support. It can be used only when the return panel width matches the worksurface depth. This bracket cannot be used with a Flex-Edge worksurface. Part# A2390	This panel attaches to both a worksurface and a panel at the end of a panel run to provide support and to eliminate the need for a return panel and panel connector. It attaches under a worksurface at the left or right end of a panel. The panel has a laminate or veneer surface and 1" adjustable glides. Part# A2380
C-Leg	H-Leg
This metal leg supports the left or right side of a 24" or 30" deep worksurface. It attaches to the worksurface and a panel at the end of a run and eliminates the need for a return panel and panel connector. The leg has 1" adjustable glides. Part #A2381	This 24" wide, H-shaped metal leg supports the left or right side of a 24" deep 120° corner worksurface at the end of a run and eliminates the need for a return panel and panel connector. The leg has 1" adjustable glides. Part #A2394
Cord Cleat	Squared-Edge Transaction Surface, Double Round End
This cleat attaches to the underside of a worksurface or table to manage cords and cables. Finish is cool grey neutral. Par #G1331	This 14" deep surface attaches to the top of a panel to provide a counter or display surface. Round ends extend 4" past the panel. It has a laminate top and vinyl edge or a veneer top and edge. The surface is predrilled for a transaction surface task light. Part #A2810
Squared-Edge Transaction Surface, Round/Rectangular End	Squared-Edge Transaction Surface, Rectangular End
This 14" deep surface attaches to the top of an Action Office Series 1 or Series2 panel to provide a counter or display surface. The round end extends 4" past the panel; the rectangular end is flush with the panel. It has a laminate top and vinyl edge or a veneer top and edge. The surface is predrilled for a transaction surface task light. Part# A2820	This 14" deep surface attaches to the top of an Action Office Series 1 or Series2 panel to provide a counter or display surface. Ends are flush with the panel. The surface has a laminate top and vinyl edge or a veneer top and edge. It is predrilled for a transaction surface tasklight. Part #A2830
Squared-Edge 120° Corner Transaction Surface	Transaction Surface Support
This 14" deep surface attaches to the top of 2 24" wide panels connected by a 2-way 120° connector . It provides a corner counter or display surface. The surface has a laminate top and vinyl edge or a veneer top and edge. Part # A2841	This center, end or mid-end bracket supports transaction surfaces. The center bracket supports 2 transaction surfaces placed above Action Office Series 1 or 2 panels in a straight-line arrangement . The end bracket supports the end end of a transaction surface placed above the last Series 1 panel in a run; it must be used with a hingeable finished end and cannot be used with 2-,3,or 4-way 90c connector; spacer; or Series 2 panel. The mid-end bracket supports the end of a transaction surface placed above a 2-,3,or 4-way 90° connector or draw rod; it can be used with Series 1 or 2 panels. Part #A0460
Transaction Surface Support, Change of Height	A-Style Suspended Lateral File
This bracket supports the end of a transaction surface placed next to a higher Action Office Series 1 or 2 panel or Co/Struc C-Series panel Part #A0464	This lockable file hangs from a panel or wall strips to hold letter-, legal-. or A4-size hanging files. It has a laminate front Part #A0510
File Converter, Suspended Lateral File	File Drawer Organizer
This bracket converts an A- or B-style suspended lateral file drawer to hold front to back hanging files. Finish is black umber Part #G5925	This 2-sectioned organizer fits into any file drawer arranged for letter-size filing. The removable top section stores computer disks and other small items. The bottom section stores larger items or can be divided into 3 compartments; it includes 2 vertical dividers. Finish is black umber. Part #G5921
Transaction Surface Support, Change of Height	A-Style Suspended Lateral File
This bracket supports the end of a transaction surface placed next to a higher Action Office Series 1 or 2 panel or Co/Struc C-Series panel Part #A0464	This lockable file hangs from a panel or wall strips to hold letter-, legal-. or A4-size hanging files. It has a laminate front Part #A0510
File Converter, Suspended Lateral File	File Drawer Organizer
This bracket converts an A- or B-style suspended lateral file drawer to hold front to back hanging files. Finish is black umber Part #G5925	This 2-sectioned organizer fits into any file drawer arranged for letter-size filing. The removable top section stores computer disks and other small items. The bottom section stores larger items or can be divided into 3 compartments; it includes 2 vertical dividers. Finish is black umber. Part #G5921