Ethospace Parts

Ethospace® Parts III
New, Used and Clone Parts
Subject to Prior Sale
Highest Quality, Lowest Possible Prices
Call for Pricing and Availability
Click on images to view dimensions


Monorail	Adjustable Spotlight
This monorail attaches to the top of a frame to mount an adjustable spotlight. D-style vertical storage unit, screen, or toll rail. It is anodized aluminum with cool grey neutral (CL) ends. Attachment hardware is included. Part # E1267 Available widths:18",24",30",36",42",48"	This adjustable spotlight mounts on a monorail and provides direct or indirect lighting. It has an energy efficient 15*watt compact fluorescent lamp, on/off switch in the base,20" flexible gooseneck, and 9' cord; overall length is 29". The spotlight has a white lampshade. It is UL listed and CSA approved. Attachment hardware is included. Part #E6010
Frame Top Cap	Connector Top Cap
This cap trims the top of a frame. It has a painted steel, enameled, or veneer surface. Part #E1260	This cap trims the top of a vinyl or fabric covered radius shaped connector or spacer and replaces a standard connector top cap. Part #E1261
Power Entry External Direct Connect,4 Circuit	Power Entry Internal Direct Connect 4 Circuit
This power entry connects a buildings electrical supply from a wall, floor or column to the base of an Ethospace powered frame. It plugs directly into a receptacle location on the frames baseline to distribute up to 4-20 amp circuits. The power entry is manufactured in a right hand direction but can be field converted to a left hand direction. The cable is available in 4 lengths and can be field cut to the appropriate length. Part # E1322 Available lengths: 6',12',18',24'	This power entry connects a buildings electrical supply from a wall, floor, or column to a powered frame. It enters the frame through the ends of the cable management cover and plugs in to the right hand receptacle outlet to a power harness. The power entry includes a 6' cable that can be field cut to the appropriate length. Due to the location of the power entry connection, only 3 receptacles locations remain available in the frame harness. Part # E1325
Power Entry Internal Direct Connect 4 Circuit	Base Power Entry Junction Box 4 Circuit
This power entry connects a buildings electrical supply from a wall, floor, or column to a powered frame. It enters the frame through the ends of the cable management cover and plugs in to the right hand receptacle outlet to a power harness. The power entry includes a cable that can be field cut to the appropriate length, Due to the location of the power entry connection, only 3 receptacles locations remain available in the frame harness. Part # G1350 Available Lengths: 6',12',18',24'	This power entry connects a buildings electrical supply from a wall, floor, or column to the base of a non-powered frame. and distributes up to 4 20 amp circuits. It includes a junction box,1 plain or grooved cable management side cover, and 6' of wire that can be field cut to the appropriate length for connection to the buildings power. The power entry does not provide receptacle access. Part # E1323
Frame Power Entry	Ceiling Power Entry Internal Direct Connect
This 4-circuit power entry connects a building electrical supply from a floor monument or wall junction box to an adjacent powered frame. It is concealed as it enters the frame and connects to an electrical harness. The power entry includes a 6' cable that can be field cut to the appropriate length. Part # E1324	This power entry connects to a ceilings electrical supply to the base of a frame, either directly or through any connector. It distributes up to 4 20 amp circuits and holds up too 90 4-pair UTP category 5 cables. The power entry has a 10'-high pole that can be field cut to the appropriate length, ceiling and base trim, connecting hardware, conduit, and a factory-installed electrical harness that plugs into the right hand receptacle outlet on the frame harness. Part # E13331
Power/Cable Entry Cover	Baseline Harness 4 Circuit
This cover conceals power or low-voltage conduits routed from the floor to the cable management tile. It can also be used without the cable management tile. The cover includes 2 floor attachment brackets and 2 trim pieces for closing gaps between the cover and the cable management tile. Part # E1326	This harness converts a non powered to a frame to a powered frame. It distributes up to a 4-20 amp circuits and provides 2 receptacle locations on each side of the frame. Part # E1354
Pass Through Harness Frame	Pass Through Harness Connector
This harness extends power from the Ethospace powered frame through a nonpowered or wall section to an adjacent powered frame or wall section. Part # E1342 Available Lengths: 18",24",30",36",42",48",60"	This harness coverts a nonpowered connector to a powered connector at the base line or beltine and passes power through the connector to an adjacent powered frame. The harness is UL Listed and CSA certified. Part # E1356
Tile Height Harness 4 Circuit	Power Jumper 4 Circuit
This harness is used with 1 or 2 cable access or cable channel tiles. It distributes up to 4 20 amp circuits, provides 2 receptacle access locations on each side of a frame, and includes a support bar for attaching the harness to a frame. Part # E1357 Available widths: 24',30",36",42",48"	This power jumper connects power from an Ethospace baseline harness to an electrical harness. The connections for both harnesses are at the same connection point as receptacles. The power jumper cannot be used with a glazed window tile, or stacking frame. Part # E1341
Electrical Bridge 4 Circuit to 4 Circuit	Vertical Wire Harness Single
This bridge connects a D-series 4-cicuit power harness to an E-series 4-circuit powered frame or connector. Part # E1370	This harness is used with a beltline face tile. It carries power from the baseline harness up to the beltline level in consecutive frames. Multiple vertical wire harnesses can connect and carry power from frame to frame. Part #E1343
Baseline Box Assembly, H-Style Frame	Beltline Box Assembly H-Style Frame
This assembly retrofits H-style electrical into any Ethospace frame. It has a junction box that holds a hard-wired, flexible-conduit electrical system (option 2)in the baseline of 1 or both sides of the frame. The assembly includes a double-wide, two-sided junction box, 2 blank covers and 2 port covers, a cable management side cover without cutouts, and a cable management side cover with receptacles cutouts. Part # EW400 Available widths: 24',30",36",42",48"	This assembly has a junction box that holds a hard-wired, flexible-conduit electrical system (option 2)in the beltline of 1 or both sides of the frame. Each assembly includes a support bar double-wide, two-sided junction box, 2 blank covers and 2 port covers and 2 replacement bezels for the space between the cutout on the cable access tile and the receptacle face. Part # EW399 Available widths: 24',30",36",42",48"
Harness End Cap	Receptacle 4-circuit 15 Amp
This cap covers the unused end port or side port of an Action Office Series 2, Prospects, Q, or Ethospace electrical harness. It also serves as a visual indicator for the last harness in a series of powered products. Cap is red Part # G1358	This receptacle locks into the baseline or beltline harness of an Ethospace frame,. A simplex receptacle package contains 1 receptacle; a duplex receptacle package contains 6 Part # E1311
Receptacle 4 Circuit 20 Amp	Electrical Distributor 4 Outlet
This receptacle locks into a 4 circuit electrical harness to proved power to equipment with a 20-amp standard plug head or cap. It also accepts 15-amp standard plug heads or caps. The receptacle is UL Listed. Part #X1311	This tile attaches to a side of a frame or to wall strips to provide a finished cover 20"-high tiles to 1 side of a transaction work surface frame and finish the area between the transaction work surface and the cable management side cover. Part # E1420
Acoustical Tile	Tackable Tile
This " high sound-reducing tile attaches to 1 side of a frame or to wall strips and has a fabric surface. It is available with 2 different acoustical ratings: one ahs a Noise Reduction Coefficient (NRC) Rating of.75 and a Sound Transmission Class (STC) rating of 21: the other one has an NRC rating of.80 and STC rating of 23 Part # E1423 Available widths: 24',30",36",42",48"	This 16" high tackable tile attaches to 1 side of a frame or to a wall strips o display notes and art .It has a fabric surface. Part # E1422 Available widths: 24',30",36",42",48"
Replacement Cover	Cable Access Tile
This cover upholsters a painted face tile or replaces the cover on a fabric-covered face tile, acoustical tile, or tackable tile. It has attachment strips to allow replacement of the fabric. Pkg contains 6 covers of the same fabric color. Part # E1490 = face tile Part # E1491= acoustical/tackable tile	This 8 " high tile attaches to 1 side of a frame of equal width and has a painted, grooved, vinyl, fabric or wrapcoat surface. It cannot be used with wall strips or tile adapters. Attachment hardware is included.? Part # E1432 = 2 receptacles locations Part # E1436 = 2 receptacle locations ,2 communication port locations
Glazed Window Tile	Open Tile Squared Stile
This glazed window tile attaches to 1 side of a frame of equal width, It cannot be used with wall strips, tile adapters, or a 4-ciruit power jumper. Part # E1411 Available widths: 24',30",36",42",48"	This metal open tile finishes a frame and provides an opening for communicating, sharing equipment, or improving air circulation. ! tile finishes both sides of a frame. It cannot be used with a stacking frame or with a 4-cicuit power jumper. Part # E1444 Available widths: 24',30",36",42",48"
Perforated Tile Squares	Counter Top Support
This perforated metal tile attaches to 1 side of a frame. It has 1/4" square perforation spaced 3/4" apart. Part # E1441	This product supports a square-edge counter top. It cannot attach to veneer connectors or crown or veneer top caps. Attachment hardware is included. Part # E2827 Available widths: 24',30",36",42",48"
Counter Top Support End Cap	Utility Shelf
This end cap closes and finishes the end of a counter top support . It has an electrical junction box to end the wiring when an adjacent counter top support with lights is used. The end cap cannot attach to a veneer connector or crown or veneer top cap. Pkg contains 2 Part # E2829	This 13" deep shelf hangs from a frame or wall strips. The underside of the shelf accepts a task light. Attachment hardware is included Part # E3220 Available widths: 24',30",36",42",48"

See More Ethospace | Ethospace II