HM Counter Support Brackets
Center
Bracket
End
Bracket
Mid-End
Bracket
The Center. End and Mid-End brackets
support counter caps. Use the Center Bracket to support 2 adjacent
counter caps on a straight-line run. The End supports the end of a
counter cap that is the end panel in a run. The Mid-End bracket is
used at the end of a counter cap above a 2, 3 or 4-way connector.
Available Colors: DT, MT, LG and LT
Item#
Description
Price
Qty
HMP444.05
Center Bracket
$ 20.00
HMP444.06
End Bracket
20.00
HMP444.07
Mid-End Bracket
18.00
HM Worksurface
Support Clear Access Panel
Support panel has laminate surfaces and 1mm
self edge. Attaches under work surface at end or midpoint to provide
support support if no full height pedestal or return panel is used.
Worksurfaces are fastened to support panel via "L" brackets. Support
panel-to panel hardware brackets are attached to rear of support panel
and inserted into panel slotted vertical. Kit includes brackets,
hardware and one glide.
(See Standard Laminates and Edge Color)
1mm Self Edge
Access
Top Depth
Price
Qty
HMU465.2400
12"
23.5"
$170.00
HMU465.3000
18"
29.5"
190.00
code33
HM Worksurface Corner Bracket
These brackets are used to support corner
worksurfaces at the rear and to support peninsula worksurfaces when butting
to a panel or when mounted directly to wall channels. DT Color Only
Item#
Description
Price
Qty
HMP455.01
Right & Left Brackets
$ 6.50/Pair
HM Worksurface Support Bracket
These brackets are
used to support the front of a hanging worksurface to provide additional
support. Return panel width must be the same as the worksurface depth. DT Color Only
Item#
Description
Price
Qty
HMP455.02
Right & Left Brackets
$ 8.00/Pair
Worksurface Support
Cantilevers
Cantilevers
support worksurfaces (24" D & 30" D) by fitting into the slotted verticals on
panels, as well as, fitting into wall hanger strips affixed to walls.
Cantilevers support the right and left side of a worksurfaces and can also be
used as a center support for longer surfaces. Cantilevers are attached to
worksurfaces with screws or with hardware that is
included.Shared Cantilevers support 2 adjacent
worksurfaces at the seam between the surfaces and are suggested for use as
center support for all worksurfaces 66" and longer.
Item#
Description
Dim D
Price
Qty
HMP165.16DT
Cantilever-Pair
16.25D
$ 42.00/pr
HMP 225.22DT
Cantilever-Pair
22.50D
58.00/pr
HMP166.16DT
Cantilever-Shared
16.25D
30.00/ea
HMP226.22DT
Cantilever-Shared
22.50D
39.00/ea
HMU165.0000
Extra Support Hardware Kit
4.00
code33
HM Worksurface Retainer
Use HMP461.14GA
for 16.25" HM Support Arm and HMP461.20GA HM Support Arm
Item#
Dimensions D
Price
Qty
HMP461.14GA
16.25D
$ 5.95/pr
HMP461.20GA
22.50D
7.95 /pr
UNP858.01ZI
retainer screw
(zinc).06/ea
HM Worksurface Grommet Kit
A Grommet
measuring nearly, 2" x 4". Installs easily in an y wood core work surface.
Available in Black Only
Item#
Price
Qty
UNP452.01BK
$ 9.00
HM Pencil Drawer & Drawer Bearers
Pencil drawer is
injected molded plastic, 3-compartment front with open storage in back.
Drawer Bearer is injected molded plastic-smooth , quiet strong-anti-tip
drawer catch. Designed to be compatible with OEM products.
Item#
Price
Qty
HMP453.01
3H x 15.75D x 20.5 W
$ 26.00
HMP454.01DT
Drawer Bearer
12.00/pr
HMP857.02ZI
Mounting Screws
.06/ea
Standard Laminates
Pionite
SE 101-S Black DT Nevamir
S-6-3T Dove Grey LT
Nevamar
ST-5280-E Taupe HT Formica
837-58 Graphite MT
Formica
85763-58 HF Formica
932-58 Antique White LU
Formica
921 Birch JT
Wilsonart 7054-60 Wild Cherry CR
Nevamir
S-6-3T Dove Grey LG
Wilsonart 7909-60 Fushion Maple MA
Pionite
SG209 Putty Grey LN
